The water purifier is not used for a long time. What should you pay attention to when restarting? Ask me!
For long-term business travel friends, the water purification equipment in the home will always be ruthlessly into the cold palace, ranging from one or two weeks to more than one and a half years. Some friends' water purifiers have not been used for a long time. When they are used again, the filter element has dried up, resulting in a sharp drop in water production, which poses a serious threat to the health of users. So, how can I re-enable it in the right way after the purifier has been left unused for a long time?
Before you start the steps:
Flushing water purifier
It has not been used for more than three days. It needs to be rinsed for 3-5 minutes. It has not been used for more than ten days and needs to be rinsed for more than 20 minutes. This function is to rinse the remaining water inside, otherwise the water of the water purifier is likely to have odor.
2. Cleaning the sewage outlet
When the water purifier is used again, it is necessary to open the sewage outlet and remove the sediment and rust inside. Otherwise, the water purifier is clogged, or there is no water, and the water has an odor.
3. Check the filter
If the water purifier is not used for a long time, the filter loses the filter function. At this time, it is necessary to check the filter element of the water purifier and replace it if necessary.
4. If the deactivation time is long, it is recommended to replace the filter
Do not use the water purifier for a long time (such as 3 months or longer), which will cause the filter to lose its filtering function and the water purifier will fail. Then we must first clean the filter element of the water purifier. After cleaning, test whether there is water purification effect. If it still does not need to replace the filter element.
5. Open the sewage outlet and discharge impurities such as sediment and rust.
Before the household water purifier is deactivated for a long time, we need to open the sewage outlet first to remove the sediment and rust, so as not to cause the water purifier to be blocked, and the water or the water may have an odor.